CODA AUDIO LA-8 LINE ARRAY
01.02.2008 CODA AUDIOLTA UUSI LINE ARRAY LA8 Type: | 2-way full range line array module | Application: | Minimal 3, maximal 20 units line array | Frequency response: | 70 Hz - 20kHz (- 3dB ) | Power handling AES: | | Low: | 500 W | High: | 160 W | Sensitivity Low: | 99 dB | Max. SPL peak Low: | 132 dB | Sensitivity High: | 115 dB | Max. SPL peak High: | 146 dB | Dispersion Horizontal: | 120° or 60° | Vertical: | Array dependent, 0° - 12° in 1° steps | Components: | | Low frequency: | 2 x 8” neodymium woofers, carbon-fibre diaphragm 2” (51mm) voice coil, 250W (AES) each | High frequency: | 2 x 4” neodymium planar wave drivers 1.75” (44.4mm) voice coil, 80W (AES) each | Crossover point: | 1300 Hz Passive or bi-amp (internal connector) | Input connectors: | 2 x Neutrick ™ NL4MP | Nominal impedance Passive: | 16 Ohm (+2/-2) | 2-way bi-amp operation: LF: | 16 Ohm (+1/-1) / HF: 16 Ohm (+2/-2) | Enclosure shape: | Horizontal trapezoid 2x6° | Enclosure material: | Baltic birch plywood | Finish: | Black textured paint | Flying Hardware: | Included | Dimensions: | 592 x 220 x 316mm (incl. Hardware) | Net weight: | 18.3 kg | System Performance Array | Horizontal Coverage | Vertical Coverage | Maximum Peak Output | 1 Enclosure | 120° or 60° | - | 132 dB | 2 Enclosures | 120° or 60° | 0 - 12° adjustable | 138 dB | 4 Enclosures | 120° or 60° | 0 - 48° adjustable | 144 dB | 8 Enclosures | 120° or 60° | 0 - 96° adjustable | 152 dB |
Variable horizontal coverage Using the exchangeable HF waveguides a variable horizontal dispersion can be achieved: 120° (short throw) or 60° (long throw) as well as asymmetrical coverage of 90° left (30° + 60°) or 90° right (60° + 30°) This allows great flexibility without the need to obtain different systems. LA8 - 120° horizontal coverage 60° + 120° horizontal coverage: AKTIIVINEN LINE-CORE 8 Type: | Active dual-amp system subwoofer | Application: | LA8 array integration | Frequency response: | 30 Hz to 80-120Hz DSP configurable | Maximum output long term: | 128 dB | Maximum output peak: | 134 dB | Amplifier: | Class D | Number of channels: | 2 | Max. Power each channel (rms): | 2400 W @4 Ohm 1200 W @8 Ohm | Total power both channels driven: | 3600 W | Max peak power: | 7200W | Max output voltage: | 145Vp/290Vpp | THD+N: | < 0,05 % (20 Hz - 20 kHz, 8 _ load, 3 dB below rated power) | Damping Factor: | > 1000 (8 _ load, 1 kHz and below) | Components: | 18” neodymium ultra low distortion woofer 8 Ohm, 4” (101.6mm) voice coil, 1200W (AES) | DSP sample rate: | 48 kHz | Converters: | 24 Bit with Delta/Sigma converters | Processing: | High precision FIR filters | Analogue Input: | XLR female (Mono input), XLR male for output link | Max. Input level: | +22dBu | Network: | 2 x Neutrick EtherCon | AC Connector: | 2 x Neutrick ™ PowerCon | Operation Voltage: | Universal Mains, 85-230V (dual voltage) Power Output 2x4-pole SPEAKON connector, channel A = pin ±1, channel B = pin ±2 | LED Indicators: | LED’s for ON, SIGNAL, CLIP, PROTECT | Gain: | 21 - 39 dB, 1dB steps | Controls: | Gain, Preset, Trim Sub | Suspension: | included | Enclosure material: | 18mm Baltic birch | Finish: | Textured Black paint | Dimensions: | 592 x 503 x 700 mm | Net weight: | 42 kg |
|